StenLight Modifications · AditNow Community

Mine exploration, photographs and mining history for mine explorers, industrial archaeologists, researchers and historians

a b c d e f g h i j k l m n o p q r s t u v w x y z

simonrl
51% (Neutral)
Administration Topic Starter

17 years ago

Nobody has posted in this forum yet, and it's entirely possible that it's has not been noticed so I thought I'd start a thread just to bring it to people's attention.

This forum was intended for discussion of StenLight modifications; uprated emitters, different optics etc.

As the UK importers read this forum you can be assured of a knowledgable response to any questions.

Thanks,
Simon

my orders are to sit here and watch the world go by

Wanna join the discussion?! Login to your AditNow Community forum account or Register a new forum account

Captain Scarlet
50.2% (Neutral)
Newbie

17 years ago

there was some mention a while ago about upgrade replacement LEDs for the Sten. Has this been delayed ?

STANDBY FOR ACTION!!!!...

simonrl
51% (Neutral)
Administration Topic Starter

17 years ago

Board replacement to take it up to Luxeon Rebel, plus a user changeable cable. But it's a bit delayed with the Rebel supply issue :(

Announcements will be made when it becomes availble 🙂

my orders are to sit here and watch the world go by

simonrl
51% (Neutral)
Administration Topic Starter

17 years ago

Off topic, but I love your new signature line 🙂 It's not just Vanoord who's come over all Latin 😉

my orders are to sit here and watch the world go by

Jimbo
50.2% (Neutral)
Newbie

17 years ago

Simon,

Can you tell me a bit more about the Stenlight connectors http://www.excellentstuff.co.uk/StenLight-S7/Connectors-Kit/c-1-69-75/ .

Need some robust connectors suitable for Oldham type cables for an interchangable lamp/battery project.

Are they waterproof & how easily can they be pulled apart (or do they lock with a release catch/clip?)

Was thinking of using Bosch automotive connectors (completely waterproof with the wire clip that has to be squeezed to release them) but they are quite expensive (£5 a pop IRRC).

Info/recomendations greatly appreciated 🙂

"PDHMS, WMRG, DCC, Welsh Mines Society, Northern Mines Research Group, Nenthead Mines Society and General Forum Gobshite!"

simonrl
51% (Neutral)
Administration Topic Starter

17 years ago

Hi Jimbo

Probably the Sten connectors are not the best option for you in this setup. The Oldham cable is much thicker than the Sten cable, the connector isn't waterproof (although that doesn't stop it working underwater, we just recommend people rinse it under clean water afterwards if it ges wet or muddy) and it doesn't lock, it's just a push connector.

It's designed as a lightweight connection as part of a lightweight setup, rather than the most rugged connector possible.

If your Bosch connectors are IP 67 or IP 68 rated then the price you've got isn't that bad.

HTH

my orders are to sit here and watch the world go by

Jimbo
50.2% (Neutral)
Newbie

17 years ago

Cheers for that Simon

Will probably go with the Bosch connectors, they are the ones you find under the bonnet of most German cars, I suppose they have to be quite tough to survive for years in that kind of environment 🙂

The price was from several years ago, but I will check with the local Bosch service centre when I get chance.

Cheers,

Jim

PS Are you still coming to the BB in August, Lot's of Northern mines waiting for you to get lost in (literally in some cases) :lol:

"PDHMS, WMRG, DCC, Welsh Mines Society, Northern Mines Research Group, Nenthead Mines Society and General Forum Gobshite!"